This tutorial is pretty straight-forward (i.e. ★ How To Update Your Jtag/RGH/RJtag W/ Xebuild.gui ★ The batteries can be recharged in a normal double-A battery recharger and can be used by any device. All you need to do is remove the logic board strips from either side of each battery. Step 3: Now, within the rechargeable battery pack is a logic board and two double-A batteries.
It's not a big deal really, but searching for it could be. If you're too aggressive, the spring could fly out of the pack.
Note: There's not much risk in doing this, but please be aware that the eject button utilizes a spring similar to that of phat 360 internal hdd's. Eventually, you should be able to use your hands to bend the top piece back exposing the inside of the pack. Step 2: Once there's enough clearance, move the screwdriver along the seam to detach the remainder of the top from the bottom.
Shimmy back and forth ‘til you slightly pry the top piece away from the bottom piece. Step 1: Take the flathead screwdriver and insert it within the gap above the eject button. You'll need to use a flathead screwdriver to pry the bottom and top pieces apart along the battery pack’s seam. Opening the rechargeable battery pack is very simple.
0 kommentar(er)
